What a Batch COA Should Contain: A Buyer's Review Guide
Updated 5 min read
A certificate of analysis (COA) is a report of test results for one specific lot. It is the main evidence a buyer receives about what is in the vial, so it is worth reading slowly. This guide walks through the sections of a COA in the order you should check them. Where a number appears below, it is an illustration of how a field might look, not a result from any real lot and not a specification of ours.
Does the document belong to your lot?
Check that the product name, lot number and dates match your container and order before reading any result. Before looking at any result, check the administrative fields.
- Product name matches what you ordered, including any salt form or variant named in your purchase order.
- Lot or batch number matches the number on the container label and your packing documents.
- Manufacturing or release date and, if given, a retest or expiry date.
- Issuing entity, meaning the company or laboratory responsible for the report, with contact details.
- Approval, usually a named person and a signature or electronic sign-off, with a date.
If the lot number is missing or does not match, stop. A COA that cannot be tied to your container is of no use as evidence, whatever else it says.
Does the COA show the right molecule?
A good identity entry gives the theoretical mass, the observed mass and the technique, usually mass spectrometry. Identity answers a simple question: is this the right molecule? Mass spectrometry measures the molecular mass and compares it with the value calculated from the sequence. For example, an entry might read "expected 1,419.5; observed 1,419.6, ESI-MS". That figure is an invented illustration. What matters is that both numbers appear, so you can see the agreement for yourself. The HPLC and mass spectrometry basics guide explains why small differences in the way mass is reported are normal.
Reference masses for the compounds we list are on their pages, for example BPC-157 and GHK-Cu, so you can check the expected value independently.
What does the purity figure mean?
On a peptide COA, purity nearly always means chromatographic purity, the share of the reversed-phase HPLC signal that belongs to the main peak, and not the share of powder that is peptide. Check that the COA states:
- the detection wavelength,
- the column and gradient or a method reference,
- the integration approach, and
- whether the figure is area percent.
A reported purity with none of those details cannot be compared with anything. The next guide in the series, purity, net peptide content and counterions, covers why a high chromatographic purity can coexist with a powder that is far from all peptide by weight.
Ask for the chromatogram itself. A summary figure hides shoulders, split peaks and late-eluting impurities that a trace shows at a glance.
Does the COA report content, water and counterion?
These three fields show how much peptide is in a given mass of powder, and they are the ones most often left out. | Field | What it tells you | |---|---| | Net peptide content | Percentage of the weighed powder that is peptide | | Water content | Moisture in the lyophilized solid, often by Karl Fischer titration | | Counterion | Which salt form is present (for example acetate or trifluoroacetate) and, if measured, how much |
If a supplier reports only purity, then any mass-based calculation you make from the powder weight assumes the powder is entirely peptide, which it is not. Look for at least a stated content method, for example amino acid analysis or nitrogen determination, and for the date of the measurement.
What do appearance and other tests add?
Appearance is a weak test, and optional tests such as residual solvents, endotoxin, bioburden or heavy metals matter only if they fit your needs and each has a method and a limit. Appearance (for example "white to off-white lyophilized powder") is a weak test, but it is useful to compare against what arrives. Some COAs add tests such as residual solvents, endotoxin, bioburden or heavy metals. None is automatically required for a research material. What matters is that the tests listed match what you or your client need and that each one has a method and a limit.
Does each result have an acceptance limit?
It should. A result without a limit is a number, not a verdict. A COA should show the acceptance criterion next to each result, such as "not less than X%". Check that the specification on the COA is the same one the supplier gave you in writing when you qualified them.
Who tested it, and when?
The COA should name the testing laboratory and dates, and you should be able to verify both. Find out whether testing was done by the supplier or an outside laboratory. Independent laboratories add value only if you can verify them. Look for a name and address, and ask whether the laboratory holds accreditation to a recognized testing-laboratory standard such as ISO/IEC 17025. Then confirm the report with the laboratory if the purchase is significant. Check test dates against the release date: results from long before manufacture, or well after shipment, are a flag.
What is a quick checklist for reviewing a COA?
Work through the eight points below in order.
- Product, lot and company details agree with your order.
- Identity shows expected and observed mass, with the technique.
- Purity states method details and comes with a chromatogram.
- Content, water and counterion are reported, or the absence is acknowledged.
- Each test has a limit and a pass/fail statement.
- Testing laboratory is named and verifiable.
- Dates are plausible and a person has approved the report.
- The COA is kept with the receiving record.
What are the warning signs of a weak COA?
Identical documents across compounds, uniformly round numbers, unlabeled traces and anonymous signatures. - A COA that looks identical across different compounds apart from the name.
- Round numbers on every field, across many lots.
- Chromatograms or spectra that are images with no axes, no sample name, or a different compound's label.
- Signatures with no name, no date or no role.
- Reluctance to provide the raw trace when asked.
None of these proves a problem on its own. Together, they justify an independent test before you accept the lot. Our COA library page explains how lot documents are handled on this site. For a wider supplier review, see how to vet a bulk peptide supplier, and for what to do with the document once you have it, see lot traceability and record keeping. Compounds such as TB-500 and thymosin alpha-1 are longer and carry more chemical variability, so for those it is especially worth asking for the trace behind the number.
How Bulk Peptides Co handles this
Every Bulk Peptides Co lot is tested by an independent third-party laboratory, and the two we use are named: Freedom Diagnostics and ILS Labs. The testing addresses identity by mass spectrometry and purity by HPLC; net content and water need asking about, since neither method measures them. Lot COAs go up on compound pages as they are uploaded, not every compound has one yet, and the COA library shows where to find them.
Questions
How do you read a peptide COA?
Check in order: that the lot number matches your container, identity by mass spectrometry, HPLC purity with method details, content, water and counterion, limits on each result, and who tested it and when.
Does a high purity figure mean the powder is all peptide?
No. HPLC purity is the share of the chromatographic signal that is the main peak. Net peptide content, water and counterion tell you how much of the weighed powder is peptide.
What are warning signs on a COA?
Identical documents across compounds, round numbers on every field, trace images with no axes or sample name, and signatures with no name or date. None proves a problem alone; together they justify independent testing.
What should a peptide COA contain?
Product name, lot number, dates, issuing entity and approval, expected and observed mass, HPLC purity with method, net peptide content, water, counterion, acceptance limits and the testing laboratory.
Why ask for the chromatogram?
A summary figure hides shoulders, split peaks and late-eluting impurities that the trace shows at a glance. Reluctance to provide the raw trace is a flag.
Related guides
How to Verify a Peptide COA Is Authentic
Six checks for a peptide certificate of analysis: lot match, laboratory identity, chromatogram plausibility, date logic and direct confirmation with the lab.
Updated
Peptide MOQs and Volume Pricing: What to Negotiate
How minimum order quantities and tiered pricing work in bulk peptide buying, what drives them, and which terms to settle in writing before you commit.
Updated
Peptide Supplier Reviews on Reddit: What Counts as Evidence
How to read peptide supplier reviews, Reddit threads and forum claims as a buyer: spot bias and astroturf, then turn anecdotes into a written test plan.
Updated
Sourcing for a business?
Approved buyers see wholesale pricing and order online. Uploaded lot COAs are public on each compound page.